HEIDENHAIN QUADRA-CHEK 2000 Demo, User Manual

Page: 58 / 92

Quick Start | Conducting a measurement
5
58
HEIDENHAIN | QUADRA-CHEK 2000 Demo | User's Manual | 06/2018
Short description
1 2
3
4
7
9
6
8
5
Figure 21:
Overview
tab in the
Details
dialog
1 Name of the feature
2 Axis positions of the center point
3 The coordinate system to which the coordinate values of the feature are
referenced
4 Feature parameter dependent on the geometry type: For the circle geometry
type, it is possible to switch between radius and diameter
5 Number of measuring points used for calculating the feature
6 Fitting algorithm used for calculating the feature; depends on the geometry and
the number of measuring points
7 Informational text field; if an annotation is active, then its contents are shown in
the features view as an annotation
8 List of geometry types to which the feature can be converted
9 View of the measuring points and the form
Renaming a feature
Drag the feature from the feature list into the workspace
The
Details
dialog appears with the
Overview
tab selected
Tap the input field containing the current name
Enter a new name for the feature
Confirm entry with
RET
The new name is displayed in the feature list
Tap
Close
to close the dialog