HEIDENHAIN QUADRA-CHEK 2000 Demo, User Manual

Page: 75 / 92

Measurement Report Template | Creating and editing a template
6
HEIDENHAIN | QUADRA-CHEK 2000 Demo | User's Manual | 06/2018
75
Inserting or removing form fields
The form fields listed below can be inserted into the page header of the
measurement report. During the creation of the measurement report, the form
fields are filled according to the entries made.
To insert or remove a form field, tap the
form field
in the list
Active form fields are indicated by a check mark
The form field is inserted into the template or removed from
the template
Form field Meaning and application
Timestamp
The date and time are inserted.
Job
The job is inserted.
User name
The user name is inserted.
Part number
The part number is inserted.
Fixed text
Fixed text is inserted into the template.
Tap the
Fixed text
form field in the template
An input field opens
Enter the desired text
To close the input field, tap anywhere outside
the input field
Variable text
Variable text is inserted. You can type the variable
text into the template. When creating the
measurement report, you can overwrite the text as
needed.
Logo
A logo is inserted.
Tap the
Logo
form field in the template
A dialog appears
Select the desired logo in the storage location
Tap
OK
to close the dialog
The logo is inserted into the template
Resizing a form field
You can adjust the size of the form field using the square handles at the corner of
the field.
Tap
Grid
to use auxiliary lines for easy alignment
Drag the square handle of the corresponding form field to the
desired size
If form fields overlap, the affected area is highlighted in red
The change to the form field is applied
Positioning a form field
You can position the form fields in the template according to your own
preferences.
Tap
Grid
to use auxiliary lines for easy alignment
Drag the form field to the desired position in the template
If form fields overlap, the affected area is highlighted in red
The change to the form field is applied