HEIDENHAIN QUADRA-CHEK 2000 Demo, User Manual

Page: 79 / 92

Measurement Report Template | Creating and editing a template
6
HEIDENHAIN | QUADRA-CHEK 2000 Demo | User's Manual | 06/2018
79
Selecting the data for the measurement report
The form fields listed below can be inserted into the data table of the
measurement report. During the creation of the measurement report, the data are
filled in according to the entries made and depending on the measured features.
To insert or remove a form field, tap the
form field
in the list
Active form fields are indicated by a check mark
The form field is inserted as a column into the data table or
removed from the data table.
Form field Meaning and application
Name
The name of the feature is inserted.
Number
The number of the feature is inserted.
Type
The feature type is inserted.
Cartesian position
The position in Cartesian coordinates is inserted.
Polar position
The position in polar coordinates is inserted.
X
The X coordinate (Cartesian) is inserted.
Y
The Y coordinate (Cartesian) is inserted.
Z
The Z coordinate (Cartesian) is inserted.
Coordinate system
The coordinate system that is used for the feature
is inserted.
r
The radial coordinate (polar) is inserted.
φ
The angular coordinate (polar) is inserted.
Size
The main dimension of the feature (e.g., the length
of a straight line) is inserted.
Length
The length of the feature is inserted.
Width
The width of the feature is inserted.
Radius
The radius of the feature is inserted.
Diameter
The diameter of the feature is inserted.
Angle
The angle of the feature is inserted.
Fitting algorithm
The fitting algorithms used on the feature or on the
activated tolerances are inserted.
No. of points / parent
features
For measured features, the number of measuring
points is inserted. For constructed features, the
number of parent features is inserted.
Form deviation
The maximum deviation from the calculated ideal
form is inserted.
Applies only to features that have
been measured using more than the
mathematically required number of
points.
Creation type
The symbol for the process with which the feature
has been generated is inserted (measuring,
constructing, or defining).