13 / 84
PL
SK
EN
CS
HU
WARNING!
B
Do not connect a damaged cable or touch the damaged cable before disconnecting
from the network. This can cause an electric shock. In case of damage to the supply,
have it replaced by an authorized service centre. This prevents a dangerous situation.
• Regularly check the supply cable and check for signs of damage or aging.
• Avoid accidental starting.
• Use only extension cables with sufficient section, which are approved for this purpose and
labelled accordingly.
• Cable drum before using completely unwind.
• Prevent spontaneous fall of small objects into the product.
• Do not use if the switch does not ensure trouble-free turning on and off.
• Never use brute force.
• The construction is done in accordance with all applicable safety requirements that apply
to it.
• Disconnect the supply (by pulling out the plug from the socket for example):
- Allways, when the machine is without supervision
- Before eliminating of blocking
- Before checking, cleaning or work on the machine
- After crash into another subject
- Allways, when the machine beginns vibrate unreasonably
- When transporting
• An inattention during work may result in loss of control over the machine.
• Do not use this machine if you tired, ill or under the influence of alcohol, drugs or medication.
• Do not put hands and feet near rotating parts or in the feeding chambers and discharge
opening.
• Do not put metal or stone into the machine.
• Do not overreach. Keep proper footing and balance at all times. This enables better control
of the tool in unexpected situations.
• Remove any adjusting key or wrench before turning the machine on. A wrench or a key that
is left attached to a rotating part of the machine may result in personal injury.
• Dress properly. Do not wear loose clothing or clothing that has cords or belts, jewellery,
and the like. Keep your hair, clothing and gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving parts.
• Prolonged use of the machine may lead to disorders of blood circulation in hands caused by
vibration. These effects can be worsened by low ambient temperatures and/or by gripping
the handgrips excessively tightly. Period of use you can extend with appropriate gloves or
regular breaks. Take frequent work breaks. Limit the amount of exposure per day.
• Use the machine only on a firm, level surface and in an open area (e.g. not near a wall or
a solid object).
• Do not use the machine on a paved or gravel surface where the thrown material may cause
injury.
• Keep your face and body well away from the filling inlet.
• Make sure that your hands or other part of your body or clothing does not get into the filling
chamber, removal channel, or near any moving parts.
• Always maintain a steady balance and firm posture. Do not reach over the machine. Do not
stand at a higher level than the machine base when inserting material into the machine.
