17 / 84
PL
SK
EN
CS
HU
• Do not throw away packaging materials until you have not reviewed carefully if they did not
remain a part of the product.
• Parts of the packaging (plastic bags, paper clips, etc.) do not leave within reach of children,
could be a possible source of danger. There is a danger of swallowing or suffocating!
• If you notice transport damage or while unpacking, notify your supplier immediately. Do not
operate the product!
• We recommend save the package for future use. The packaging materials must still be
recycled or disposed of in compliance with the relevant legislation. Sort different parts of
the packaging according to material and hand it to the appropriate collection sites. For
further information contact your local administration.
1. See fig 2.
Take the device out from the package. Unwrap the accessories. Pull out the shredder
adapter (8) from the debris bag (12).
2. Check the packing list.
– Shredder adapter
– Chassis with debris bag
– 2 wheel caps
– Assembling material
– 2 adjustable legs
– 2 wheels
– B affle plate
• Standard accessories are subject to change without notice.
• This product requires assembly. The product must be assembled correctly before use.
ASSEMBLY INSTRUCTION
WHEEL AND SUPPORT LEGS ASSEMBLY
1. See fig 3
. Loosen the screw with a cross slot in each leg (14) and extend both parts.
2. Attach both legs (14) to the chassis (13).
3. Mount both wheels (15) and attach the wheel caps.
SHREDDER ADAPTER ASSEMBLY
1. See
fig. 4
. Before mounting the shredder adapter, unconditionally slide debris bag into
the chassis. Make sure that the debris bag is unblocked: safety switch (see no.16 in) in
position ‚OFF‘.
2. Grasp the shredder adapter (8) using the handle (17) and filling funnel (6) (see figure 1). For
easier assembly insert the adapter onto the mounting tray in two people.
3. Slide the tie bar panels (18) of the shredder adapter into the slot (19) of the mounting tray (10)
and slide the tie bar panels along the horizontal groove in direction to the wheels (See also
a small
fig. 2
).
4. Insert baffle plate (9) into the concave between the shredder adapter and the mounting tray
and screw and tighten it by 2 screws with internal hexagon.
DEBRIS BAG BLOCKAGE
1. To block the debris bag, slide the safety switch (see fig 1. no.16) to „ON“ position.