manualshive.com logo in svg

Heatilator ECO-ADV-PS35, Owner'S Manual Installation And Operation, Page: 56 / 56

Share
Download
Heatilator ECO-ADV-PS35 Owner'S Manual Installation And Operation Download Page 56

 56

This product may be covered by one or more of the following patents: (United States) 6830000 and 5582117 or other U.S. and foreign 

patents pending.

DO NOT DISCARD THIS MANUAL

CAUTION

•  Important operating and 

maintenance  instruc-

tions included.

• 

Leave this manual with 

party responsible for use 

and operation.

• 

Read, understand and 

follow  these  instruc-

tions for safe installa-

tion and operation.

DO NO

T

DISCARD

Date purchased/installed: 

 

Serial Number: 

 

  Location on appliance: 

 

Dealership purchased from:  

  Dealer phone:  

Notes:  

   

 

   

 

   

We recommend that you record the following pertinent

 information for your ECO-CHOICE PELLET STOVE

Heatilator • ECO-ADV-PS35/50 • 7058-142D • July 21, 2010

Please contact your Heatilator dealer with any questions or concerns. 

For the number of your nearest Heatilator dealer, please visit www.heatilator.com.

CONTACT INFORMATION:

Hearth & Home Technologies

1445 North Highway

Colville, WA  99114

Division of HNI INDUSTRIES

Summary of Contents for ECO-ADV-PS35

























































Reviews:

No comments