manualshive.com logo in svg

Heatilator ECO-ADV-PS35, Owner'S Manual Installation And Operation, Page: 1 / 56

Share
Download
Heatilator ECO-ADV-PS35 Owner'S Manual Installation And Operation Download Page 1

www.heatilator.com

 WARNING

If the information in these instruc-

tions is not followed exactly, a 

fire may result causing property 

damage, personal injury, or death.

 

• 

Do not store or use gasoline or other flam

-

mable vapors and liquids in the vicinity of 

this or any other appliance.

•  Do not overfire - If heater or chimney con

-

nector glows, you are overfiring. Overfiring 

will void your warranty.

•  Comply with all minimum clearances to 

combustibles as specified.  Failure to 

comply may cause house fire.

Fire Risk.

WARNING

Tested and approved for wood pellets.  

Burning of any other type of fuel will void 

your warranty.

WARNING

Hot glass will cause burns.

•  Do not touch glass until it is cooled

•  NEVER allow children to touch glass

•  Keep children away

•  CAREFULLY SUPERVISE children in same room as 

fireplace.

•  Alert children and adults to hazards of high 

temperatures.

High temperatures may ignite clothing or other 

flammable materials.

•  Keep clothing, furniture, draperies and other flammable 

materials away.

HOT SURFACES!

Glass and other surfaces are 

hot during operation AND 

cool down.

Owner’s Manual

Installation and Operation

Models:
ECO-ADV-PS35

ECO-ADV-PS50

Pellet Burning Stove

Heatilator • ECO-ADV-PS35/50 • 7058-142D • July 21, 2010

1

Check building codes prior to installation.

•  Installation MUST comply with local, regional, state and national 

codes and regulations.

•  Consult local building, fire officials or authorities having jurisdic

-

tion about restrictions, installation inspection, and permits.

CAUTION

DO NOT DISCARD THIS MANUAL

CAUTION

•  Important operating and 

maintenance  instruc-

tions included.

• 

Leave this manual with 

party responsible for use 

and operation.

• 

Read, understand and 

follow  these  instruc-

tions for safe installa-

tion and operation.

DO NO

T

DISCARD

ECO-ADV-PS35

ECO-ADV-PS50

Summary of Contents for ECO-ADV-PS35

























































Reviews:

No comments