Figure 16
6.
Assemble the two Vertical Bars onto the Horizontal Bars using four (4) S1 bolts, with W3
washers and N1 nuts as shown in Figure 17. The Vertical Bars slide into the Horizontal Bars
(see Figure 18 for correct assembly). The Vertical Bars must be spaced to match the width
of the VESA hole pattern (usually 400 mm (15
3 4
⁄
”) or 600 mm (23 5/8”)).
Figure 17
7.
Fix the Vertical Bars and Hook Plate to the back of the TV Display by connecting the proper
screw (S4/S5/S6) into the VESA holes. Select the proper washer (W1/W2/W3) to be used
with the screws. Figure 18.
Figure 18
Screws:
S1-M8.0X15: 4pcs
W3-D8 washer: 4pcs
N1-M8 nut: 4pcs
