5.
Hang the Storm Shell Back on the wall. Use a 13 mm socket and wrench to attach the TV
Bracket using the S9 Lag Bolts and the W3 washers (note the washers are placed between the S9
bolt head and the TV Bracket mounting hole). Ensure that the TV Bracket is level and installed
in the right direction. See Figure 12.
Figure 12
6.
Secure the Storm Shell Back to the wall by installing two (2) S8 screws and two (2) W4 washers in
the lower mounting holes (Figure 13). Tighten the S8 screws in the upper left and right
keyholes.
Figure 13
Screws:
S9-ST8.0X60: 4pcs
W3-D8 washer: 4pcs
Screws:
S8-ST3.5X20 screw: 2pcs
W4-D6 washer: 2pcs
This side up
