Install the TV Display
Caution: This TV bracket can be used for a TV up to 55". The maximum weight of the TV display
should be less than 66 lbs. (30 kg.).
The installation kit includes screws of various diameters to ensure optimal installation.
Figure 15 shows the parts of the TV Bracket.
Figure 15
1.
Place the TV display screen down on a soft, flat surface. Locate the four (4) threaded
mounting points that are located on the back of the display (called the VESA mounting holes).
2.
Determine which screw (S4/S5/S6) is the proper size for the VESA mounting holes.
3.
If the TV display has a curved back, or recessed VESA holes, the W2 Thick Washer can be used as
needed.
4.
Determine the VESA mounting hole pattern dimensions. Typical dimensions are 200 mm x 200
mm (7 7/8” x 7 7/8”), 400 mm x 400 mm (15
3 4
⁄
” x 15
3 4
⁄
”), 600 mm x 400 mm (23 5/8” x 15
3 4
⁄
”).
5.
Remove the two Vertical Bars and Hook Plate from the Swing Arm by removing the two securing
screws at the connection of the Hook Plate to the Swing Arm (Figure 16):
Vertical bar
Horizontal bar
Hook plate
Swing arm
