HearthStone Quality Home Heating Products, Inc ®
26
WFP-75 Model 8411
Additional Equipment (optional)
Forced air distribution kit + Insulated flex pipe for forced air distribution kit
Gravity air distribution kit + 8in rigid ducting
Outside air kit + 4in insulated pipe, outside wall termination, and clamps
Fire screen
Heat shield for combustible shelf
6 SAFETY INFORMATION
6.1
SUMMARY OF INSTALLATION CAUTIONS AND
WARNINGS
•
THE INFORMATION GIVEN ON THE CERTIFICATION LABEL AFFIXED
TOTHE APPLIANCE ALWAYS OVERRIDES THE INFORMATION
PUBLISHED,
IN ANY OTHER MEDIA (OWNER’S MANUAL,
CATALOGUES, FLYERS, MAGAZINES AND/OR WEB SITES).
•
MIXING OF APPLIANCE COMPONENTS FROM DIFFERENT SOURCES
OR MODIFYING COMPONENTS MAY RESULT IN HAZARDOUS
CONDTIONS.
•
ANY MODIFICATION OF THE APPLIANCE THAT HAS NOT BEEN
APPROVED IN WRITING BY THE TESTING AUTHORITY VIOLATES
CSA B365 (CANADA), AND ANSI NFPA 211 (USA).
•
IF REQUIRED, A SUPPLY OF COMBUSTION AIR SHALL BE PROVIDED
TO THE ROOM.
•
DO NOT CONNECT TO OR USE IN CONJUNCTION WITH ANY AIR DISTRIBUTION DUCTWORK.
•
DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVING ANOTHER APPLIANCE.
•
THIS FIREPLACE HAS NOT BEEN TESTED TO BE INSTALLED IN A MOBILE HOME.
•
THIS FIREPLACE HAS NOT BEEN TESTED TO BE INSTALLED INSIDE A MASONRY CHIMNEY.
6.2
REGULATIONS COVERING FIREPLACE INSTALLATION
When installed and operated as described in these instructions, the WFP-75 wood fireplace is suitable for
use in residential installations.
In Canada, the CSA B365 Installation Code for Solid Fuel Burning Appliances and Equipment and the CSA
C22.1 Canadian National Electrical Code are to be followed in the absence of local code requirements. In
the USA, the ANSI NFPA 211 Standard for Chimneys, Fireplaces, Vents and Solid Fuel-Burning Appliances
and the ANSI NFPA 70 National Electrical Code are to be followed in the absence of local code
requirements.
NOTE
THE FIREPLACE IS NOT APPROVED FOR USE WITH A SO-CALLED “POSITIVE FLUE CONNECTION”
TO THE CLAY TILE OF A MASONRY CHIMNEY.
