HearthStone Quality Home Heating Products, Inc ®
25
WFP-75 Model 8411
CAUTION
•
OPERATION OF YOUR WFP-75 WITHOUT THE BAFFLE MAY CAUSE UNSAFE AND HAZARDOUS
TEMPERATURE CONDITIONS AND WILL VOID THE WARRANTY.
5.2.4
FIRE BAFFLE REMOVAL PRIOR TO CLEANING THE CHIMNEY
Before starting to clean your chimney, we recommend that you remove the fire baffle to avoid creosote
dust collection on top of the baffle.
Follow the steps below to remove the fire baffle:
•
Remove the front air tube.
o
Using pliers, rotate the tube until the locking channel on the left end of the tube aligns with
the tab. Slide the tube to the right, out of the hole. Angle the tube down and remove from
the fireplace.
•
Remove the middle front tube following the same steps.
•
Lift the baffle and slide it out of the fireplace. You now have access to the chimney.
•
Remove the remaining two tubes for clearer access to the chimney.
See
Appendix 9: Installation of Secondary Air Tubes and Baffle
for details.
5.2.5 CHIMNEY FIRE
Regular chimney maintenance and inspection can prevent chimney fires. If you have a chimney fire, follow
these steps:
1. Close the fireplace door and the air intake controls;
2. Alert your family of the possible danger;
3. If you require assistance, alert your fire department;
4. If possible, use a dry chemical fire extinguisher, baking soda or sand to control the fire.
Do not use water as it may cause a dangerous steam explosion;
5. Check outside to ensure that sparks and hot embers coming out of the chimney are not
igniting the roof;
6. Do not use the fireplace again until your chimney and fireplace have been inspected by
a qualified chimney sweep or a Fire Department Inspector.
PART B – INSTALLATION
Install the fireplace only as described in these instructions and using only components from the chimney
manufacturers listed in table 3.
Included with your product
WFP-75 Fireplace with cast iron door and facade
Classic moulded refractory brick panels
Outside air adapter and blocking plate
Top and rear standoffs
Parts Required
Insulated chimney made by the manufacturers listed in table 3, with the corresponding specifications :
−
Chimney lengths
−
Elbows (where necessary)
−
Associated components as per these installation instructions.
