HearthStone Quality Home Heating Products, Inc ®
21
WFP-75 Model 8411
5. Remove spacer rings from the
latch shaft to tighten the door
seal, add spacers to the latch
shaft to loosen.
6. Note the flat spot on the latch
shaft. The set screw in the
handle docks on this flat spot to
prevent handle rotation on the
shaft. Reinstall the latch shaft,
washer and spring.
7. Reinstall the handle on the
latch shaft by threading it on
clockwise and tighten until the
handle crank body is 1/8” away
from the door face.
8. Firmly snug set screw.
5.1.4 DOOR ALIGNMENT
To align, open the fireplace’s door
and loosen the pressures screws
located on the lower and upper
hinges of the door using a 3/32” Allen key to free the adjustable hinge rods.
Using a flat screwdriver, turn the adjustable hinge rods in the direction shown to adjust the doors. Tighten
all door hinge pressure screws when they are at the desired positions.
