-28-
Trouble Shooting
Error Message:
E1 (ERROR 1):
Normal state
: During workout, when the monitor did not get the count signal from the
gear motor more than 4 seconds and check under successive 3 times
then the LCD will show E1.
Power on state
: The gear motor will return to zero automatically, when the signal of
motor cannot be detected for more than 4 seconds then the gear
motor’s driver
will be cut off immediately and show the E1 on the
LCD display. All the other digital and function mark are blank, and
the output signals are cut off also.
E2 (ERROR 2): When the monitor read the memory data, if the I.D. code is not correct or
the memory IC damages then the monitor will show E2 immediately at
power on.
E3 (ERROR 3): After 4 seconds by start mode, the computer detects the faulty motor did
not leave the zero point then the LCD bar displays “E3”.
