-14-
Step 8
Part 1
Install the Left Handlebar (A17) onto the end of Axle sits on the left side of Main Frame
(A01) using one Curve Washer (G12) ,one M10X19 Washer (D02) and one Nylon Nut
(C05) as shown as below drawing ,then tighten the Nylon Nut (C05).
Part 2
Repeat the process on the Right Handlebar (A18) onto the end of Axle sits on the left side
of Main Frame (A01) using one Curve Washer (G12) ,one M10X19 Washer (D02) and one
Nylon Nut (C05) as shown as below drawing ,then tighten the Nylon Nut (C05).
Crank(E01 / E02)
Crank Fixed
Round Plate (E13)
B
A
B
Linkage Arms
(A05)
MAIN FRAME AXLE
