4 Planning and installation – Installing the heating system
37
I
NSTALLING
THE
ASH
CONTAINER
1.
Push the ash container (1) diagonally from the left under the
reservoir.
2.
Push the handle (2) all the way in.
✓
The opening s in the ash container are open.
3.
Close the clamp lock (3).
✓
The ash container is installed.
M
OUNTING
THE
EXPANSION
MODULES
1.
Attach the base plate (1)
under the reservoir on the
boiler and bend the front part
down to the ground.
Figure 4/35 - Mounting the base plate
1
Figure 4/36 - Mounting the support plate
1
3
2
4.
Adjust the foot (1) of the ash
container.
Figure 4/37 - Adjusting the foot
1
Important!
If an EM4 or EM8 expansion module is used, these can be mounted
directly on the plate above the automatic burner.
✎
For connecting the expansion module, see the “Electrical plans
for the HDG K10 - 60”.
