4 Planning and installation – Installing the heating system
31
I
NSTALLING
THE
RESERVOIR
1.
Attach the auger motor (1) (contained in the combustion chamber
on delivery) to the holder with the lug at the back and the centring
screw at the front.
2.
Fasten the auger motor with the two M8 screws (SW13) (2).
3.
Screw the gear wheel (3) using the M6 screw (SW10) and a washer
onto the auger at the bottom of the reservoir.
4.
Thread the in the reservoir with the conveyor auger (2) into the
auger pipe (1).
5.
Attach the reservoir at the top by the yellow markings into the two
hooks (3).
The auger motor is installed under the reservoir on the auger.
Figure 4/15 - Installing the auger motor
1
2
3
2
3
1
Figure 4/16 - Attaching the reservoir
2
3
1
