Digital PEN User Guide
Procedure by HCL Infosystems Limited-Product Engineering Group Page 1 of 31
Overview
NOTETAKER is a unique device that captures notes handwritten on plain paper, and transmits them to
the base unit. The Pen Uses Pegasus’ patented technology combining Ultrasound and Infrared
technologies with sophisticated algorithms to enable an accurate tracking and positioning system that
tracks the movement of the tip of the pen on any surface and converts the movement into a vector image
of the user’s handwriting.
Software environment
Operation System: Windows XP (Specially with usage with Class Mate PC Only)
Hardware Environments
System: CMPC (Class Mate PC)
Minimum Memory Requirement: 256MB
Display Resolution: 800x480.
Setting up Your Pen
WARNING:
Do not attempt to open the Digital Pen.
This may cause the pen to malfunction.
Installing/Replacing an Ink Refill into the Pen
The top of the pen cap also functions as an ink refill Extractor.
NOTE
: Make sure you use a refill that is similar to the original (standard refill
(67.2mm long X 2.33mm diameter).
To replace the ink refill
? ?
Remove Pen cap
? ?
Slide the new refill into the tip of the pen
? ?
Gently press it in until it is securely in place
