HCI BM15AP, Operation And Installation Manual

Page: 11 / 27

ANDROID™ OPERATING SYSTEM
Once the set is powered on the Android OS will load. Once the OS has completely
loaded you will see the home screen. (If the set has just been plugged in it may take
up to 1 minute for the Android™ operating system to load).
The BM15AP is a touch screen device, all navigation and setup can be done using the
touch screen and virtual keyboard.
*If you are using the arrow buttons for navigation press the “ENTER” button to select
the highlighted app.
*To select an App or button you can press the App icon on the screen or use the left/
right/up/down arrow buttons to select an App and press the “ENTER” button.
*You can press the “BACK” button on the front keypad to move back or return to a pre-
vious page or menu. You can also use the “BACK” button on a Healthcare Information
IR remote.
*To bring up a virtual keyboard on the screen press an input area and the keyboard
will automatically appear..
Setup and Operation
Setup and O
p
er
ation
SETUP AND OPERATION
Installing The IR Remote Control Batteries
1. Turn the IR Remote over. Press down on the arrow and slide the battery cover off the
bottom.
2. Install the two included AAA batteries. The polarity is indicated on the bottom of
the battery compartment. Make sure the batteries are installed correctly.
3. Slide the battery cover back onto the remote and snap into place.
Once the installation is complete and all optional equipment is connected verify the
proper power supply is plugged in. Turn the set on by pressing the power button on
the front panel or IR controller.