H B X Z O N - 0 6 0 0 Z o n e C o n t r o l
V e r s i o n 1 . 0 . 0
Page 10
ZONE SEQUENCE SETUP
When using more than one ZON-0600 and you
would like them to communicate wirelessly between
each other, specifically in relation to dampers,
demands and priorities, then they will need to follow
a sequential order. Each sequence represents 4
possible thermostats (THM-0600) per zone controller
with a maximum of 5 ZON-0600’s in total. The first
sequence will always be labelled Primary and
represent sequence 1-4.
• Primary (1-4)
• 5-8
• 9-12
• 13-16
• 17-20
WI-FI SETTINGS
Wi-Fi Password
- Input the password for the 2.4 GHz
SSID network that you are connecting to. (capital
letters, special characters, numbers and lower case
characters all available).
Wi-Fi SSID Manual Entry
– This is where you can
manually input the 2.4GHz SSID network that you want
to connect to, use this method if the network does
not auto populate when you perform the Wi-Fi SSID
Scan. Ensure that you input this network exactly how it
would appear, including spaces, numbers, capital or
lowercase letters and or special characters.
Wi-Fi SSID Scan
– Pressing this will allow the ZON-0600
to actively scan for all available networks that you
can choose from, and then you may select the 2.4
GHz network that you wish to connect to.
Connect Now
- Once you have selected the
appropriate network and you have entered the
correct password for that 2.4GHz network, pressing
Connect Now will establish a connection to the Wi-Fi
network.
ZONE CONTROL ID/PRIMARY ZONE ID (1-255)
If the Zone Sequence was set to the Primary then this
number will represent this ZON-0600’s ID. If the Zone
Sequence was set to any of the other sequences you
can then set this value to represent the Primary Zone
Control ID and they will LINK automatically.
If the connection is successful the option will display
“Server”. If the connection is not successful the option will
display ready. If it displays “Wi-Fi” you may need to open
port 1314 on your network router.
