H B X C P U - 0 6 0 0 C o n t r o l
V e r s i o n 1 . 0 . 0
Page 16
• Sync Code -
Sync code of the CPU-0600
• Wi-Fi Network -
displays current SSID network
connected to
• Wi-Fi Password -
displays network password
connected to
• Wi-Fi Strength -
displays Signal strength of the
network
The CPU-0600 allows for expandability for more boiler
staging between controllers. A maximum of four (4)
controllers can be utilized for a maximum of 16 boiler
stages. When using more than one CPU-0600, to allow
them to communicate wirelessly between each other,
they will need to follow a sequential order.
STAGE SEQUENCE SETUP
– This setting will allow you to
select the stage sequence in your systems setup.
The first sequence is labelled Primary and represents
sequence 1-4.
• Primary (Stages 1-4)
• Secondary (Stages 5-8) *CPU-0600 #2
• Secondary (Stages 9-12) *CPU-0600 #3
• Secondary (Stage 13-16) *CPU-0600 #4
CONTROL ID
– If the Sequence was set to the Primary
then the number under Control ID will represent this
CPU-0600’s ID. If the CPU Sequence was set to any
sequence other than Primary, that CPU-0600’s Control
ID can be set to match the value of the Primary CPU-
0600 Control ID and the CPU-0600’s will then LINK
automatically. The CPU-0600’s will be LINKED when the
Sequence Link symbol appears on the top left of the
Main Screen for both controllers.
MIXING MODE: CONTROL STATUS
MIXING MODE: STAGE SEQUENCE SETUP
