HBM SCOUT55, Operating Manual

Page: 47 / 64

47
Scout 55
HBM A0236-5.9 en
3.5.9 Additional functions (ADD. FUNCT)
P_ _:
In order to provide better support should you experience technical problems,
the firmware status is indicated by this parameter. If you have any questions
for our service department or HBM branch, giving the existing firmware
version will enable us to provide effective support.
Example: P34
Software version P34
SERIAL NO:
Display the serial number of the device.
BAUDRATE:
You can choose between the following values as the baud rate for the serial
interface.
Selectable baud rates
300 600 1200 2400 4800 9600
PARITY:
The following settings are possible:
Selectable parity EVEN PAR. ODD PAR. NO PAR.
STOPBITS:
The following settings are possible:
1 STOPBIT
2 STOPBIT
COMM. ADDR*:
Input the device address.
Selectable device addresses 00 to 31
*)
Address selectable only for RS485 version; for RS232, set address to 1
PRINT.GROSS:
Output the gross value over the serial interface.
OFF/ON
PRINT NET:
Output the net value over the serial interface.
OFF/ON