HBM SCOUT55, Operating Manual

Page: 44 / 64

44
Scout 55
HBM A0236-5.9 en
You can set the following parameters:
ENABLE:
You can enable or lock the peak value stores.
PVS ON Enable peak value store
PVS OFF
peak-value memory/buffer/store locked
PVS1 INPUT:
Choice of input signal for peak value store PVS1.
GROSS.VALUE NET VALUE
PVS2 INPUT:
Choice of input signal for peak value store PVS2.
GROSS.VALUE NET VALUE
ENVELOPE CURVE:
You can choose the discharge rate of the envelope function for both the peak
value stores. The specification corresponds to a time in ms.
00000 s envelope function off
000.100 to 060.000 s
envelope function on
3.5.8 Inputs and outputs (IN/OUT)
In this menu, you can make the required settings for the SCOUT 55 input
signal, the analogue output and the remotes.
SOURCE UA:
The following signals can be specified as the source of the analogue signal:
GROSS.VALUE Gross
NET VALUE
Net
PVS1 MAX Store for maximum values
PVS2 MIN Store for minimum values
PVS3 PP
Store for peak-to-peak value