HBM SCOUT55, Operating Manual

Page: 28 / 64

28
Scout 55
HBM A0236-5.9 en
3.3 Button functions in measuring mode
Key Meaning
Change from Measuring mode to Programming mode (and vice
versa) by pressing for approx. 2s .
Set the limit values LV1...4 (see from Page 41)
The additional parameters of the limit switches such as
hysteresis, direction etc., are unchanged. The limit value
function can be activated in the LIMITVAL.1...4 menu
(see Page 41).
Zeroing the measurement chain (also possible by remote).
The signal at the input is applied as the zero point.
Taring the measured value (also possible by remote).
The current measured value is applied as the tare value.
Deletes the contents of the peak value store (also possible by
remote). This function applies to all peak value stores (Min,
Max, Peak-to-Peak).
Output of measured values and parameters over the RS-232
interface (also possible by remote).
For possible print parameters, see “Additional function” starting
on Page 47.
Only those parameters (PRINT xxx) selected in additional
functions will be printed.
Switches the measured value display between:
Gross value no marking in the display
Net value (=gross minus tare) “NET” is displayed
Minimum value
“MIN” is displayed
Maximum value “MAX” is displayed
Peak-to-peak value “MAXMIN” is displayed
3.3.1 Querying and setting limit values in measuring mode
You have several options available when choosing the limit values (in
measuring mode):
a: Numerical value entry for limit values
b: Apply input signal as limit value
c: Fast search (keep arrow keys pressed for several seconds)
SET
CL