HBM SCOUT55, Operating Manual

Page: 15 / 64

15
Scout 55
HBM A0236-5.9 en
Replacing the fuses:
Switch off the device and take out the mains cable.
1 Lever off the cover and fold it forward
2 Take out the fuse holder
3 Replace the fuses
− Fit the fuse holder, paying attention to the correct mains voltage (the
chosen value can be seen in the “window”).
2.3.2 Device mounting
mounting frame and
carrying handle
press (on both sides) and
fold down the handle
Fig. 2.4:
SCOUT 55 mounting
2.4 Transducer connection
The following transducer types can be connected to the SCOUT 55:
D
S.G. full and half bridge transducers
D
Inductive half and full bridge transducers
D
Potentiometric and piezoresistive transducers
D
LVDT (Linear Variable Differential Transformer)
A 15 − pin socket on the back panel of the housing, labelled BU1, is used for
connection.