HB-100/140/160Z1
Temperature Control Unit
Operation
O8285-EN 2017-12
97
8.12.2 Recording actual data
Function
When the
Record USB
function is activated, the values selected in
Setting \ Recording USB
are written to the USB data carrier.- A
new recording file is created each day. If saving to the USB data
carrier is not possible, a corresponding warning is displayed.-
Start recording
Fig. 72: Recording USB
Proceed as follows to start recording actual data to a USB data
carrier:
1.
Display menu page
Save/Load
.
2.
Connect USB data carrier to front connector.
3.
Select the
Recording USB
function and confirm with the
key.
The function activated is indicated with the
symbol.
The data is saved to the USB data carrier.
The active Recording USB is indicated with the
symbol on
the basic display.
Stop recording
Proceed as follows to stop an active recording:
1.
Display menu page
Save/Load
.
2.
Select the
Recording USB
function and confirm with the
key.
The USB data carrier can be removed.
Set recording interval
Proceed as follows to set the recording interval:
1.
Display the menu page
Settings \ Recording USB
2.
Set parameter
Cycle serial recording
to the desired value.
NOTICE!
If the desired recording interval is not possible,
recording will be made at the fastest possible
interval.