HB-100/140/160Z1
Temperature Control Unit
Installation and initial commissioning
O8285-EN 2017-12
43
6.3.4 Setting up system connections
WARNING!
Danger from hydraulic energy!
When using unsuitable pressure lines and
connectors, the danger exists that liquids under
high pressure can escape and cause severe or
fatal injuries.
Therefore:
– Use only temperature-resistant pressure lines.
NOTICE!
Specific to the product, system connections are
screwed or plugged in. If the recommended size of
hose cannot be connected to the consumer, a
reduction in bore at the consumer and not at the
unit must be achieved to keep the pressure drop to
a minimum.
WARNING!
Bolted assemblies, especially combinations of
stainless steel / stainless steel or steel / stainless
steel tend to adhere strongly or can seize up after a
longer period of operation at high temperatures.
This results in difficulties in dismantling.
Therefore:
– Use a suitable lubricant.
