HB-CL2
Cleaning Unit
Operation
54
O8305-EN 2022-01
Neutralization time
Fig. 26: Setting neutralization time
If necessary, before switching on neutralization, set the
neutralization time:
1.
Display the menu page
Settings \ Cleaning
.
2.
Set
Time of neutralization
to the desired value.
8.1.2.3 Pre-preservation phase
In this phase the connected components are being neutralised and
pre-preserved with pre-preservation agents. At the end of the pre-
preservation phase the connected components are emptied again.
Fig. 27: Set pre-preservation
The pre-preservation phase is either carried out automatically,
omitted or queried depending on the setting of the
pre-
preservation
parameter.
The pre-preservation parameter is set as follows:
1.
Display the menu page
Settings \ Miscellaneous
.
2.
Set parameter
Pre-preservation
to the desired value.
With the setting OFF, the pre-preservation phase is
omitted, with the setting ON, the pre-preservation is started
automatically and with the setting Query, it is being asked
whether the pre-preservation phase should be started or not.
