HAZET-WERK 9041-2, Operating Instructions Manual

Page: 15 / 28

15
3 Design and function
IMPORTANT:
We recommend using air filters and
a compressed air reducer.
ATTENTION!
Disconnect the compressed air sup­
ply prior to connecting or discon­
necting the tool.
• Connect the tool to a hose of suitable size.
See table on page 14
3. Calibration
The tyre inflator is calibrated. After expiration of
the calibration period the tyre inflator must not
be used until it has been recalibrated. The cali­
bration period is written on the tyre inflator. The
calibration is valid two years after the end of the
year in which the tyre inflator was calibrated.
The owner is responsible for calibration.
4. Before starting operation
Always ensure the tyre inflator is
used, inspected and maintained
in compliance with the respective
local, state, national or federal
regulations.
• Drain the compressor tank and remove the
condensate from the air lines. Carefully read
operating instructions for the compressor.
2. Scope of delivery
9041-2: Tyre inflator,
coupler plug 7.2
Operating Instruction
1
Manometer
2
Coupler plug
3
Operating lever
4
Hose
5
Plug