Management & Control Software User’s Manual
- – 1-5
STEP 2:
There are links on this page, including Quick Installation Guide, View User’s Manual,
Release Note, and Install Software. Click on “Install Software” to launch the intallation shield.
The InstallShield Wizard will come on and Figure 1-2 will appear.
Figure 1-2 Welcome page for the Management & Control Software
STEP 3:
If you click on “Next” and Figure 1-3 appears, it means you have installed a previous
version of the recording software (the previous version is the video-only version, which means it
would not get the audio stream from servers). If you want to keep the previous version, choose
the second option. If you are new to the Smart VS-IP recorder software, this window will not
appear; skip on over to Step 4.
Figure 1-3 Video only version detected
