Hawking HNC300, User Manual

Page: 33 / 84

Saturation Control:
djusts the light frequency to suit your area of operation. The two available options are 50 Hz or 60 Hz (default).
Adjusts the saturation level. The default setting is 64.
Light Frequency:
A
Note:
50 Hz and 60 Hz variants are available to accommodate the different light frequencies found in the USA (60 Hz) and
Europe (50 Hz). This is to ensure better image quality for the HNC300 and HNC320W.
Save/Cancel:
for the
ireless network camera. You can alternately click on the “Cancel” button to restore all settings to the values last saved
or retrieved from the network camera.
sers
he “Users” menu contains com itted
monitor the network cam
lick on “Users” in the sy
ser Name:
allowed, and each user name must
e different. Several users can utilize each user name and password, given that they have been disclosed to all of those
the User Name is “Guest” and the User Password is “Guest”, anyone who has this user name and
for the User Name is 12 characters (Printable ASCII).
- Enter the user name in this field. A maximum of 64 users names is allowed. However, each user
h user name and password, given that they have been disclosed to all
f those users. For example, if the User Name is “Guest” and the User Password is “Guest”, anyone who has this user
name and password can access the camera. The maximum length for the User Name is 12 characters (Printable ASCII).
After making sure all settings in the “Image” section are correct, click on the “Save” button to store the settings
w
to
U
T mands to allow the system administrator to assign privileged users who will be perm
era from a remote site.
stem administration menu bar and the Users screen will appear as illustrated below:
to
C
Add User
U
For the HNC300 - Enter the user name in this field. A maximum of 8 user names is
b
users. For example, if
password can access the camera. The maximum length
For the HNC320W
name must be different. Several users can utilize eac
o
33