16
4.
Repeat this process by walking toward the fence boundary
(about 6 feet over from the last flag), placing a flag, and
then stepping back into the Roaming Area until the entire
containment area is surrounded. (see Illustration E.)
NOTE:
These flags represent the location of your wireless
fence and will be used later to train your dog. Be sure that
the flags form an enclosed area and that your dog has safe,
adequate entry to your house.
Turning the Trigger Zone Off/On:
1.
Navigate to the Menu where Setup Menu and Display
Options are listed. (see Screen 2.3)
2.
Press the blue flashing Power Button to Turn Off the
Trigger Zone. (see Screen 2.4)
3.
Press the Power Button again to Turn On the
Trigger
Zone.
NOTE:
All settings will be retained in system memory
when you Turn Off the System.
Setting Up the Fence Boundary/Trigger Zone
Placing Training Flags: (continued):
3.
Place a Boundary Training Flag in the ground (see Figure 1.8).
Move back into the Roaming Area until the Collar stops beeping.
TIP:
If hard ground makes it difficult to place a flag, use a
screwdriver to poke a hole in the ground, place the flag in
the new hole and make sure it is upright.
Screen 2.3
Screen 2.4
Po
Po
P
P
Po
Po
o
we
we
w
e
w
we
we
we
w
w
e
r
r
r
r
r
r
Havahart
®
Radial-Shape Wireless Dog Fence
1-800-800-1819, Option 1
Figure 1.7
Figure 1.8
!
IMPORTANT MESSAGE
If you have difficulty hearing the tone of the
Collar, you can use the Heart-Shaped Collar
Tester to visually confirm the boundary.
Hold the metal contact points located inside
the holes of the Heart-Shaped Collar Tester
against the Probes of the Havahart
®
Collar
so that metal is touching metal. Carry the
Havahart
®
Collar by the grey battery container
of the Collar with the Heart-Shaped Collar
Tester held against the Probes. Fully extend
your arm down by your side. Make sure that
your body does not get between the Collar
and the Controller as your body may affect
the signal and cause the boundary to shift
inward. Walk to a boundary point and watch
the Heart-Shaped Collar Tester illuminate.
