Haulotte HT23RTJ O, Maintenance Book

Page: 239 / 534

239 4001055250 E 10.21 USA / GB
Platform
Weighing adjustment procedure (calibration)
MS0164
7.3 - C
HECKS
7.3.1 - Control the load with HAULOTTE DIAG
N.B.-:-B
EFORE ANY LOAD CHECK AND WAITS FOR THE STABILIZATION OF THE BASKET DURING
30
S
. D
ON
’
T TOUCH
THE BASKET DURING THE MEASURE
.
The access to the menu is via the following menu : MACHINE SETTING/CALIBRATION/CONTROL
WEIGHT
N.B.-:-T
HE WEIGHTING SYSTEM IS
OK
IF THE INDICATED VALUE IS EQUAL TO THE REAL ONE
+/-10%.
7.3.2 - Control the overload alarm
1. Put the nominal load in the basket : No overload alarm must be activated. (Note : For dual
loads machines check the 2 loads)
• If this test failed replace the load cell.
2. Put the test load in the basket(Nominal load x 1,2) : The overload alarm must be activated.
(Note : For dual loads machines check the 2 loads)
• If this test failed replace the load cell.
3. Unload the basket.
Lexical
Weight Load( kg or lbs)
Overload Overload state( YES or NO)
Selected Load ode selected( 230 kg or 450 kg)
Inst. Load Instantaneous load(kg)
Aver. Load Average mode(kg)
F1 Sensor 1 frequency(Hz)
F2 Sensor 2 frequency(Hz)
Nominal load of the platform Test load
180 kg 216 kg
200 kg 240 kg
230 kg 276 kg
350 kg 420 kg
450 kg 540 kg