Haulotte Group star 13, Operator'S Manual

Page: 87 / 104

A
B
C
D
E
F
G
H
I
87 4000426500 E 02.16 USA / GB
STAR 6 - STAR 13
D
- Operation instructions
To recharge the aerial work platform batteries :
Attach a 12 AWG multi-strand, grounded extension cord with a maximum length of 15 m (50
ft) to the receptacle located on the charger.
Plug the extension cord into outlet.
Start-up is automatic as soon as the mains connection is established. The charger is fitted with
a LED indicator placed near the special holding frame :
• Green indicator : Battery charged 100 %
• Yellow LED : Battery charged 80 %
• Red LED : Charger in the intitial charge phase
The CHARGING indicator LED remains lit continuously during the first stage of the charge
cycle. The charge current will be displayed on the BATTERY CHARGER FACEPLATE.
To display the Battery Voltage, press (push) in and hold the BATTERY VOLTAGE button.
When the battery charge reaches 80% of capacity, the yellow 80% CHARGED indicator LED
will become lit and the green CHARGING indicator LED will begin to flash.
Unplug the extension cord from the outlet and the charger receptacle on the aerial work
platform. Store the extension cord for next use.
N.B. -:-Always unplug the battery charger power cord before moving the aerial work platform. Failure to
disconnect power cord could cause damage to the equipment.
Do not disconnect any output leads or connectors between the batteries and the charger when the charger
is on. To stop a charge in progress, always unplug the extension cord from the AC power source.
Recharge batteries in a well-ventilated area only. Do not charge batteries near fire, spark or other potential
ignition sources. Batteries may emit highly explosive hydrogen gas while charging. Failure to properly
ventilate the charge gasses could result in death or serious injury. Always charge aerial work platform
batteries away from flammable materials.