Haulotte Group star 13 Operator'S Manual Download

Page: 69 / 104

4000426500

E 02.16

USA / GB

STAR 6 - STAR 13

- Pre-operation inspection

4.9 -

WHEEL MOTOR BRAKE RELEASE

Each time a drive command is activated, electric power releases the brakes.

4.10 - POTHOLE PROTECTION SYSTEM

To reduce the risk of overturning, the machine is equipped with a pothole mechanism under
the chassis that is deployed automatically when the platform is out of the stowed position .

4.11 - ON-BOARD CHARGER

Battery charging starts as soon as an external supply is connected to the battery charger.

4.11.1 - Battery charge level

The indicator (90) indicates charge status :

When the battery pack is being charged with an external power supply, the machine's electric system is
automatically deactivated.

• Green indicator :

Battery charged 100 %.

• Yellow indicator :

Battery charged 80 %.

• Red indicator :

Battery in initial charging phase.

Summary of Contents for star 13









































































































Search results

Summary of Contents for star 13

Reviews:

Related manuals for star 13

Brands by name

Popular brands

Haulotte Group star 13, Operator'S Manual

Search results

Summary of Contents for star 13

Reviews:

Related manuals for star 13

Brands by name

Popular brands