Haulotte Group star 13, Operator'S Manual

Page: 66 / 104

66 4000426500 E 02.16 USA / GB
STAR 6 - STAR 13
C
- Pre-operation inspection
4.2 - ACTIVATION OF CONTROLS
The enable switch must be active to allow all movements.
The "Enable Switch" system depends on the machine configuration and will consist of one of
the following :
• Enable trigger on platform control joystick.
• Enable switch on the ACTIV'Screen on ground control box.
4.3 - FAULT DETECTOR
The machine is equipped with an on-board fault detection system, which indicates the type of
fault to the operator.
The fault is identified by a default code.
The default code is dispalyed at the ground control box.
According to the type of fault, the machine MAY switch into DOWNGRADEMODE and certain
movements are prevented to maintain Operator's safety.
Do not use the machine until the fault has been corrected.
4.3.1 - Buzzers test
From the ground control box
Step Action
1 Pull both the E-Stop buttons (46) at platform box and (15) at ground box.
2 Turn the control box activation selector key ( 92 ) downwards or upwards to activate a control box.
3 The audible beep sounds.