Operating and maintenance instructions - H14TX - HA16TPX
38
4.2.2.4 -Tank compartment
Photo 7: Tanks
• Check the levels
- hydraulic oil: a light indicator shows the level when the cover is
closed (ref 1, Photo: Tanks, page 38), if necessary, fill up via the
plug (ref 2, Photo: Tanks, page 38).
- diesel: 2 light indicators show the min and max levels when the
cover is closed. Fill up if necessary (plug ref. 3, Photo: Tanks, page
38).
NOTA:
To fill up, use the products recommended in section (Chap
5.2.1 -, “Consumables”, page 46).
4.2.2.5 -Motor compartmen
Photo 8: Motor
• Check that the air filter is clean - see motor manual.
• Check the level of motor oil: gauge (ref 1, Photo: Motor, page 38), if
necessary, fill up (see motor manual).
• Check the hydraulic oil filter clogging indicator (ref. 4 , Photo: "Turnta-
ble" control panel, page 35). If the red indicator is visible, replace the
filtration cartridge (Chap 5.3.1 -, “Summary table.”, page 48).
• Check the level of battery electrolyte: the level should be approxi-
mately 10 mm above the plates. Fill up if necessary with distilled wa-
ter.
4.3 -
STARTING OPERATION
IMPORTANT:
Use of the machine should only begin when all of the instructions given in
the previous section have been followed scrupulously.
To become familiar with the machine carry out the first few manoeuvres
from ground level, keeping the machine in its transport configuration:
counterweight forward, boom lowered.
1
2
3
1
Summary of Contents for H14T
