Haulotte Group H14T, Operating And Maintenance Instructions Manual, Page: 54 / 78

Operating and maintenance instructions - H14TX - HA16TPX
40
Caution!
4.3.2 - Operations from the platform
NOTA: Before starting a movement, you must raise the boom a few
metres to prevent the basket scraping along the ground dur-
ing movement.
(See , Photo: "Platform" control panel, page 36))
Climb into the basket, respecting the maximum load instructions and
distributing, if necessary, the load over the whole platform.
MAXIMUM LOAD:
H14T(X): 230 kg
(including 2 people).
H16TP(X): 230 kg
(including 2 people) for basket
2300*800 option and basket
1800*800.
NOTA: If the load in the platform exceeds the maximum authorised
load, no movements are possible from the platform control
station. The overload light indicator on the platform panel and
the buzzer alert the operator. Load must be removed to re-en-
able the machine. There is no load restriction on the reach.
4.3.2.1 -Control station test
• Before making any manoeuvre, ensure that the green light indicator
(ref.4) is on, showing that the machine power is on and that the "plat-
form" station has been selected
• Ensure that the emergency stop button (ref 14) is unlocked.
• Check that the buzzer works properly.
4.3.2.2 -Movement test
• To make a movement, the corresponding manipulator or selector
must be selected.
• Press the "fail-safe" contact and activate the chosen manipulator.
• The speed and angle of tilt of the manipulators will enable gradual
movement.
• If the base is not horizontal, correct the platform position using the cor-
responding selection switch.
• Test the telescoping, jib (H16TP), basket rotation movements with the
associated selector.
• Test the rear axle steering movement using the selector on the travel
manipulator handle.
• With the machine in the folded position, try the three travel speeds by
activating the speed selector.
• The direction of movements is indicated by coloured arrows.
Work can now begin.