Haulotte Group H14T, Operating And Maintenance Instructions Manual, Page: 48 / 78

Operating and maintenance instructions - H14TX - HA16TPX
34
Caution!
Caution!
Never stand underneath or too
close to the machine during
manoeuvres.
4.1.2 - Unloading with ramps
Select low travel speed.
This method requires the machine
to be started: see section 4.3 to
avoid all risk of false manoeuvre.
Precautions: ensure that the ramps can bear the load, that they are
properly fixed and that adhesion is sufficient to prevent any risk of slipping
during the manœuvre.
NOTA: The slope of the ramp is almost always greater than the max-
imum work slope, which means the boom must be lowered to
authorise travel. In this case, the buzzer sounds but travel re-
mains possible.
If the slope is greater than the maximum slope in travel (see
section 2.4), use a winch as additional traction means.
4.1.3 - Loading
The same precautions as for unloading apply.
Fig. 6 - Loading
Ensure that the machine is secured as shown in the above diagram:
• a sling at each lug
• a chain above the basket to hold it on the ground.
To climb the ramps of a truck, select the low speed.