2L41C, 2M41, 2M41Z
Maintenance
HATZ
83
Operator’s Manual
8.2.17 Renewing the poly v belt and checking the function of the switch-off
unit
NOTICE
i
When changing the belt:
▪
Always check the function of the switch-off unit. The switch-
off pin must emerge by spring force, or else the machine will
not switch off automatically if the belt tears.
▪
If the grooves are broken off or bent, renew the damaged
pulley.
▪
To be absolutely sure that you order the right poly v belt – in
terms of the length – it is recommended that you measure
the diameter of the fan-side pulley and use this as the basis
for your selection.
Belt types
Because of the different diameters of the fan-side pulleys, in combination
with different engine types and versions, various lengths of poly v belts are
used.
Type and engine
version
ID number
Belt length mm
Fan pulley
Ø mm
2L41C
502 031 00
920
72
All remaining types
and versions
501 415 00
910
64
Overview — Removing the poly v-belt
1
Cylinder screw
2
Tension pulley
3
Pulley
Summary of Contents for 2L41C
Page 2: ......
