2L41C, 2M41, 2M41Z
Operation and use
HATZ
43
Operator’s Manual
Indicators
The function of all indicators is checked when the starting key is turned.
They flash or light up for different times. If there is a fault, the applicable indi-
cator does not go out after the engine start or it lights up again during opera-
tion.
Explanation of symbols
Symbol
Meaning
Operating indicator
Lights up during operation when there is no engine fault.
Charge control
Fault in the alternator or alternator charging circuit. The battery
is no longer charged. Eliminate the fault immediately.
Oil pressure display
Engine oil pressure too low. Danger of engine damage. Stop the
engine immediately and check the oil level (see section
).
Contact
HATZ Service
if the oil level is correct.
Engine temperature display
Engine temperature is impermissibly high. Danger of engine
damage. Switch off the engine immediately! For details of trou-
bleshooting, see section
Air filter maintenance display
This display lights up if the air filter is dirty. Clean or replace the
filter cartridge immediately.
For more information, see chapter
8.2.11 Maintaining the dry air
.
Pre-glow display
Lights at temperatures below 0 °C. Start the engine when the in-
dicator has gone out.
Procedure – Starting the engine with a starter
NOTICE
i
▪
Start for max. 30 seconds. If the engine is still not running
after that, turn the starting key back to position "0" and elimi-
nate the cause (see chapter
).
▪
Turn the starting key to position "0" every time you want to
start the engine.
▪
The anti repeat device in the ignition lock makes it impossi-
ble for the starter to engage while the engine is running and
become damaged.
Summary of Contents for 2L41C
Page 2: ......
