Hatteland HD 12T04 series, User Manual

Page: 42 / 82

2
IND100129-63
INB100026-1 (Rev 9)
Specifications - HD 15T06 FOxx + HD MMD01-xxx
Flange Models
Note: All specifications are subject to change without prior notice!
PRODUCT SPECIFICATIONS - HD 15T06 FOxx + HD MMD01-xxx
T E C H N I C A L D E S C R I P T I O N M E C H A N I C A L D E S C R I P T I O N
2/2
T E S T I N G / A P P R O V A L S & C E R T I F I C A T E S
Physical Considerations:
• 359 (W) x 307 (H) x 75 (D) mm (with flange)
• Weight: 7.5kg (approx)
User I/O Ports:
Environmental Considerations:
This product have been tested / type approved by the following classification societies:
Behind Rubber Hatch - Front (FOAA / FOAC only):
• USB IN : 1 x USB TYPE A (for loopthrough)
Backpack:
• DVI-I Signal IN : 1 x 24Pin DVI-I (or as RGB IN with adapter)
• RGB Signal IN : 1 x 15Pin HD D-SUB (female)
• Comp. Video IN : 1 x RCA Phono (female)
• S-Video IN : 1 x SVHS S-Video (female)
• USB OUT : 1 x USB TYPE B (for loopthrough)
• COM1 RS232 : 1 x D-SUB 9P (female) (Serial Contr. Interface)
• If AC Power IN : 1 x Std IEC Inlet (female)
• If DC Power IN : 1 x Screw Terminals
Optional Solutions:
• COM2 : 1 x D-SUB 9P (female) (Feature Connector)
• Resistive Factory Mounted Touchscreen (FOAC/FOBC+Cxx Backpack)4wire
• VSD100507-1 Split Cable RS422/485 - MALE to 2 x FEMALE 9P D-SUB
NOTE: Products with factory mounted touchscreen is not type approved
Available Options/Accessories:
• Navigator Push Function : On/Off, OSD Menu, Hotkey
• Navigator Rotary Function : Brightness, Menu Navigator
• Navigator Indicator : Mode Status LEDs
User Controls - FOAA / FOAC:
• Navigator Push Function : On/Off, OSD Menu, Hotkey
• Navigator -/+ Buttons Function : Brightness, Menu Navigator
• Navigator Indicator : Mode Status LEDs
User Controls - FOBA / FOBC:
Power Specifications:
Power Supply Options & Type Numbers:
• 115&230VAC - 50/60Hz : HD 15T06 FOxx + HD MMD01-xx1
• 24 VDC : HD 15T06 FOxx + HD MMD01-xx2
Power Consumption:
• Operating : 35W (Max) (Brightness @ 100%)
Synchronisation & Signals:
Analog RGB1 & RGB2:
• Separate, composite synchronisation & synchonisation on green.
• Interlaced and non interlaced
• Auto detects VGA -> UXGA
• VGA : 640 x 480 (including 640 x 350)
• SVGA : 800 x 600 (including 720 x 400)
• XGA : 1024 x 768 (Recommended @ 60Hz)
• SXGA : 1280 x 1024
• UXGA : 1600 x 1200
• Sync. Range Horizontal : See “Preset Signal Timings” in user manual.
• Sync. Range Vertical : See “Preset Signal Timings” in user manual.
DVI:
• Auto detects VGA -> XGA
Composite & S-Video:
• Interlaced PAL / NTSC / SECAM
TFT Characteristics:
• TFT Technology : Color Active Matrix LCD Module
a-Si Thin Film Transistor (TFT)
• TFT Size : 15.0 inch
• Pixel Number : 1024 x 768
• Pixel Pitch (RGB) : 0.297 (H) x 0.297 (V) mm
• Response Time : 30 ms (TYP) - black to white to black
• Contrast Ratio : 350:1 (TYP)
• Light Intensity : 600 cd/m
2
(TYP)
• Viewable Angle : 45  (Up), 55  (Down), 60  (Left/Right) (TYP)
• Active Display Area : 304.1 (H) x 228.1 (V) mm
• Max Colors : 16.7 millions
• Operating : Temperature -15 deg. C to +55 deg. C
- Humidity 20% to 85% (non condensing)
• Storage : Temperature -20 deg. C to +60 deg. C
- Humidity 5% to 85% (non condensing)
• IP Rating : IP22 (FOAA/FOAC) or IP66 (FOBA/FOBC) models
• Compass Safe Dist. : HD 15T06 FOxx + HD MMD01-xxx
Standard: TBD Steering: TBD
To prevent heat to build up inside the display we recommend installing the unit in a
vertical po/- 40 degrees maximum. We also recommend adding forced
cooling in applications where; Vertical mounting angle is above +/- 40 degrees --
Operating temperature is above 25C -- Ventilation area around unit is restricted.
Fans should be mounted to enhance natural airflow directed upwards through the unit.
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.