Hatteland HD 12T04 series, User Manual

Page: 26 / 82

26 Operation
INB100026-1 (Rev 9)
IND100064-15
On Screen Display (OSD) Menu Navigating
QUICK START:
The On Screen Display (OSD menu) is accessible by pushing the navigator knob/button inwards AND
hold it for 3 seconds. To understand the menu and its usage, please follow these steps for a quick start.
1-BUTTON VERSION: (with rotary switch and USB Connector)
1: While powered on, and image visible on screen, push the navigator knob inwards and hold for 3 seconds.
The OSD menu will be visible with available functions you can adjust or control.
2: You can move to the next function icon by using the navigator rotary function (clockwise or counter-clockwise)
Select function by pressing the navigator knob inwards. You will now enter it’s menu and options.
: Select clear text options within icon menu by using the navigator rotary function again. It will be possible to
navigate upwards and downwards by rotating the navigator knob. The selected option will turn yellow.
Push the navigator knob inwards once and the option will be editable.
: Use the navigator rotary function to increase/decrease/select values or enter sub-menus.
5:
To confirm the changes, select the option “RETURN”. After this, navigate to the EXIT icon and push the navigator
knob to save settings and remove the menu overlay. “RETURN” will always exit to the previous menu.
-BUTTON VERSION: (without rotary switch and USB Connector)
1: While powered on, and image visible on screen, push the navigator button inwards and hold for 3 seconds.
The OSD menu will be visible with available functions you can adjust or control.
2:
You can move to the next icon by pushing the decrease/increase (-/+) buttons. Select function by pressing
the navigator button inwards. You will now enter it’s menu and options.
: Select clear text options within icon menu by pushing the navigator button. It will be possible to
navigate upwards and downwards by pushing the decrease/increase (-/+) buttons.
The selected option will turn yellow. Push the navigator button inwards once and the option will be editable.
:
Use “-” or “+” buttons to increase/decrease values or enter sub-menus.
5: To confirm the changes, select the option “RETURN”. After this, navigate to the EXIT icon and push the navigator
knob to save settings and remove the menu overlay. “RETURN” will always exit to the previous menu.
OSD MENUS:
The OSD menu consists of 4 modes: (This icon will indicate if function is available throughout the manual).
Mode 1 - Available functions in RGB / DVI MODE “Simplified” OSD Menu - (Logo will appear)
User can adjust the most common functions needed to operate the display.
*Some functions are not available in DVI mode
Mode 2 - Available functions in RGB / DVI* MODE “Full” OSD Menu - (No logo will appear)
User can access more advanced functions. (Service menu)
*Some functions are not available in DVI mode
Mode - Available functions in VIDEO MODE “Simplified” OSD Menu - (Logo will appear)
User can adjust the most common functions needed to operate the display.
Mode - Available functions in VIDEO MODE “Full” OSD Menu - (No logo will appear)
User can access more advanced functions. (Service menu)
RGB/DVI MODE = When RGB/DVI signal (i.e OS or radar / charts) are displayed full screen.
VIDEO MODE = When video signal (i.e CAMERA / VCR / DVD) are displayed full screen.
OSD KEYCODE/MODES:
If the OSD menu has been set to “Simplified” mode, a special keycode has to be entered before the OSD menu will be accessible
as “Full” mode again. After changes has been made in the “Full” mode, and user exits the menu, the OSD menu will reset back
to “Simplified” upon next entry of the OSD Menu. This can be overridden while in “Full” mode, by setting the “Utilities/OSD Set -
tings/Default OSD Mode/” to always be in “Full” mode. When user enters the menu anytime, the “Full” mode menu will be available
always. By Factory Default the OSD menu layout is set to “Full” mode.
The keycode procedure is to prevent unqualified personnel entering the OSD menu and make severe changes that may affect the
overall performance of the unit after installment. The special keycode is by factory default set to 158 .
The keycode field will be located in the lower right corner of the screen, and looks like this:
(Use the navigator buttons/knob to change/enter the code).
WARNING !! MODIFYING CERTAIN PARAMETERS MAY AFFECT THE PERFORMANCE OF THE DISPLAY.
1
2
3
4
0 0 0