Hatteland HD 12T04 series, User Manual

Page: 33 / 82

Operation
INB100026-1 (Rev 9)
IND100064-14
LOAD DEFAULT: (Click to enter sub-menu)
LOAD USER DEFAULT : Load your own custom settings.
SAVE USER DEFAULT : Save your own custom settings.
LOAD FACTORY DEFAULT : Will reset the VGA controller settings to the factory preset.
Use caution when using this function, as this will override
your current settings.
SETUP DDC : Display Data Channel. Reset/optimize image information.
This function should be executed to setup correct DDC
(Display Data Channel) information when the backpack has
been replaced. It allows the display to send its specifications
to the display controller.
TEST PATTERN : Shows a generic test pattern.
VIDEO SOURCE:
Selecting this function will enable the user to select the type of input signal to show
fullscreen. Available inputs are: Analog RGB1, Analog RGB2, DVI, Composite
Video, and S-Video
.
The display unit will switch signal source instantly, so if no
signal source is present (physically connected) the image will be black for 1-2
seconds before it resets back to the previous detected signal.
POWER OFF:
Selecting this function will start the shutdown procedure for the unit. Please
read the STATUS LED overview section for more information.
EXIT:
Selecting this function will exit the OSD menu and save the current settings.
Note:
The OSD settings will also automatically be stored in memory when the OSD exit on user timeout.
On Screen Display (OSD) Menu Functions
1
4
2
3
1
4
2
3
1
4
2
3
1
4
2
3
1
4
2
3