Hatteland HD 12T04 series, User Manual

Page: 20 / 82

20
Backpack / Bracket Replace / Removal - Series 2
INB100026-1 (Rev 9)
IND100078-13
Installation
How to change functionality / replace backpacks or remove bracket from product.
The Series 2 products are based on a modular backpack concept, which allows users to easily
change the functionality. To change the functionality of your product from a display product to
operate as a computer product or vice versa for example, please follow this procedure.
Note: Please review the corresponding manual for your backpack on how to operate your Series 2 product.
Also review the serial number label on the backpack. These labels have information regarding the power input.
Note: Ignoring the warnings we have provided with the icon, will be subject for warranty void.
1: Turn the power off and remove all cables.
Place the product as indicated on a table.
Make sure the display glass is protected!
The navigator control should be free of any
obstruction. Do not move the product on the
table while its in this position, as this will
scratch and damage the glass.
2: With bracket: Remove all 8 screws as shown.
Note: On 12inch there is only 4 screws (4x12mm)
( DIN 965 Torx A4 Black ) located on the product.
Do NOT mount/dismount the bracket/backpack
when the product is in a upright/stand position.
Place it as shown in step 1 above.
Notice where the different lengths of screws
are located. Failure to remount the screws back
to their original factory location may cause the
bracket to loose it’s strength and/or stability.
Bracket Removal
If you wish to use the Series 2 product without the factory
mounted bracket, remove all 8 screws (4x10mm and 4x12mm)
( DIN 965 Torx A4 Black ) as shown in step 2 above. Now, leave
the backpack in place and fasten it to the display module using
4x6mm screws as shown in illustration (step 3) below.
DO NOT EXCEED THE LENGTH OF 4x6mm WHEN
MOUNTING/REMOUNTING THE BACKPACK TO THE
DISPLAY MODULE.
: Without bracket: Remove 4 screws only.
4x6mm.
Backpack / Bracket Replace / Removal - Series 2
Length: 6mm Length: 6mm
Length: 12mm Length: 10mm
Length: 12mm
12mm 10mm 6mm