・
Place a block of ice on the center of the shaving
table. The ice should not exceed the area of the
shaver blade. Otherwise, the ice will not be shaved
well or it will be shaved improperly and might
jump out. Keep your hands away.
・
Turn the crank handle counter-clockwise to lower
the ice holder and let its prongs grip the ice firmly.
If the ice is not firmly gripped, it could jump out.
・
Move the sliding cover (shaving shield) to the right
to close it securely. If it is not closed properly, the
unit will not work even though it has been turned
OPERATION INSTRUCTIONS
1) Plug in the machine. Make sure the power switch
is turned to the off position before plugging in the
unit.
2) Place a block of ice on the shaving table.
・
Move the sliding cover to the left to open.
3) Prepare a cup under the shaving table to receive the
the shaved ice.
4) Switch ON. Shaving ice begins.
・T
urn the crank handle clockwise to raise the crank handle.
・Confirm the ice holder does not descend when you
remove a supporting hand from the crank handle.
- If it falls down, it could cause injury.
Turn the tention bolt clockwise to hold the position.
HOW TO USE