REMOVING THE BLADE AND
ATTACHING THE BLADE
4
HOW TO CHANGE BLADES
Switch OFF and unplug the unit when
changing blades or during cleaning and
maintenance.
Use gloves and do not touch the blade
tip directly. Otherwise it could cause
injury.
WARNING
1) Switch off and unplug the unit.
2) Move the sliding cover to the left to open.
3) Raise the crank handle clockwise to raise the ice
holder.
5) Slightly loosen the two Phillips screws that fasten
the blade. But do not take off the screws.
6) Remove the blade upwards through the opening
of the shaving table.
4) Turn the blade adjustment knob counterclockwise
so that the blade tip comes out slightly over the
shaving table.
7) Position a new blade that its engraved mark "
初雪
(Hatsuyuki in Japanese)
“
faces the guide plate, and
insert it in between the blade holder and the
guide plate from the opening of the shaving table.
8) Position the blade so that its bottom touches the
blade holder and then fasten it by the screws
firmly.
9) Turn the blade adjustment knob clockwise to
lower the blade not to be over the shaving table.
Engraved
「初雪」