CLEANING(COVERS)
MONTHLY MAINTENANCE
4) Insert the crank handle to the worm shaft temporarily
(Ref. Page 7 Fixing Crank Handle). Turning the crank
handle, lubricate the 2 small holes of the wormshaft
holder top and the contact of Y-brake and the
wormwheel.
5
) Attach the head cover and then attach the crank
handle to the crank handle shaft. Lubricate the main
shaft and the shaft holder while moving the shaft up
and down. Put the shaft cover after lubricaton.
(Refer Page 7 Mounting the Shaft Cover)
・
Wipe covers using a soft, dry cloth.
・
Clean hardened dirt using a damp cloth and warm
water. A gentle dish detergent can be used. Be sure to
completely remove any traces of detergent with a
damp cloth.
・
Lubrication - Use the gear oil included as a standard
accessory.
1) Turn the crank handle counter-clockwise to lower the
ice holder to the bottom. And remove the Philips
screw that fastens the crank handle.
2) Turn the shaft cover counter-clockwise and lift it
to remove it.
3) Remove two philips screws
① ②
fastening the head
cover by
(+)
screw driver. Take out the round sticker
hiding the screw and remove the screw. Remove the
screw
③
fastening the crank handle by
(+)
screw driver.