Hatsuyuki HB310B2 User Manual Download Page 3

Attention

to Dust.

    WARNING

Do not install the machine in a damp or wet place.

It can cause electric bleeding or electric shock.

Do  not  install/place  the  machine  close  to  any  heating  appli-
ance.

Never install/place the machine close to any heating appliance such 
as a gas burner. It can cause melting and/or burning of plastic cover.

This machine is for "COMMERCIAL USE".

Be  sure  to  keep  the  machine  away  from  children  to  avoid  electric 
shock or injury.

Do  not  pour  water  over  the  machine  or  immerse  machine  in 
water.

It can cause a short circuit or electric shock, as well as rust and other 
water related problems.

Do not damage power supply cord.

Never work on power cord and never pull, twist or bundle it. Do not 
place  a  heavy  things  on  it.  It  can  damage  the  power  cord  and  can 
cause electric shock or fire.

Keep plug clean and plug into outlet correctly.

Always keep plug clean and plug into outlet correctly. Dirty plugs or 
imperfectly connected plugs can cause electric shock or fire.

Do not touch any electrical parts (such as plug or switch) with 
wet hands.

It can cause electric shock.

In  the  event  of  circuit  breaker  moving  to  "OFF"  position,  please 
contact  the  machine  vendor.  Switching  breaker  to  "ON"  position 
incorrectly or by force can cause electric shock or fire.

VENDOR

Summary of Contents for HB310B2



















Reviews: