HOW TO USE
3
Remarks
・
Connect the drain hose to the drip tray. Place a bucket to
receive drip water through the drain hose.
・
Plug the unit into an appropriate socket (voltage is
specified on the machine plate). Refrain from using a
generator as this is not covered by the warranty.
・
Clean the food zone, such as the ice shaving area, upon
first use. There could be dust in the chamber.
CHECK BEFORE OPERATION
・
Attach the enclosed crank handle
in the following
manner:
1) Ice that is very cold or smoky in color is not suitable for
shaving because it is too cold and hard. Use
transparent ice of an appropriate temperature. Ice that
is smoky in color will not produce soft and fluffy
shaved ice. It could damage the blade tip and the
blade will not shave the ice. Use transparent ice for
soft and fluffy shaved ice.
2) Do not put things on the unit. The main shaft turns
when the unit starts and it could be dangerous.
2) In attaching the crank handle in paragraph 1,
connect them aligning the cut of the worm shaft
with the cut of the crank handle.
3) Put the crank handle to the body using Phillips
bolt and fasten it by screwdriver firmly. Check the
handle if it raises the main shaft upwards and
downwards smoothly.
●
Mount the shaft cover on the top
of the unit.
2) Turn the shaft cover clockwise until it stops with
a clicking sound.
1) Place the shaft cover in the position that 3 hooks
meet the holes of the body top.
1) There is a hole on the right of the head cover.
Push the crank handle shaft through this.